Chipkind Electronics는 어떤 인증과 품질 시스템을 보유하고 있나요?

Chipkind Electronics는 ISO9001 및 IATF16949 인증을 받았으며, 국제 품질 기준을 준수하여 신뢰할 수 있는 소싱, 엄격한 품질 관리 및 지속적인 개선을 보장합니다.

MAX4062EUB+에 대한 기술 지원은 어떻게 받을 수 있나요?

MAX4062EUB+의 데이터시트, 핀 배치도 및 응용 노트는 제품 페이지에서 확인할 수 있습니다. 추가 기술 지원이 필요하면 문의 양식이나 이메일을 통해 지원팀에 연락해 주세요.

반품 또는 교환 정책은 어떻게 되나요?

모든 상품은 출하 전 검사(PSI)를 거칩니다. 배송 후 90일 이내에 문제(부족, 잘못된 상품, 육안으로 확인 가능한 결함)가 보고되고, 제품이 미사용 상태이며 원래 개봉되지 않은 포장에 있어야 하며, 반품 승인(Return Authorization)을 받은 경우 반품 또는 교환이 가능합니다.

MAX4062EUB+의 배송은 어떻게 이루어지나요?

저희는 DHL, FedEx, UPS, TNT를 통해 배송합니다. 발송 후 배송 추적 정보가 이메일로 전송됩니다. 익스프레스 배송은 일반적으로 3~5 영업일이 소요됩니다. 요청 시 선택적 배송 보험도 이용 가능합니다.

어떤 결제 수단이 지원되나요?

저희는 전신환(T/T), PayPal, 신용카드, Western Union, MoneyGram, Alipay, WeChat Pay를 지원합니다. 일부 결제 수단은 주문 금액 및 배송지에 따라 수수료가 발생할 수 있습니다.

표시된 MAX4062EUB+의 가격 및 재고 정보가 정확한가요?

MAX4062EUB+의 가격 및 재고는 자주 업데이트됩니다(보통 24시간 내). 시장 변동으로 인해 최종 가격과 재고는 영업팀에 확인하시기 바랍니다. 견적은 일반적으로 5일간 유효합니다.

Chipkind Electronics는 MAX4062EUB+의 진품을 어떻게 보장하나요?

모든 MAX4062EUB+ 부품은 Analog Devices Inc./Maxim Integrated 및 공인 대리점에서만 조달됩니다. 공급업체는 엄격한 자격 심사를 통과하며, 각 배치는 출하 전에 검사되어 100% 정품임을 보장합니다.

MAX4062EUB+을(를) Chipkind Electronics에서 어떻게 주문할 수 있나요?

Analog Devices Inc./Maxim Integrated MAX4062EUB+은(는) 두 가지 방법으로 주문할 수 있습니다. (1) 장바구니에 추가(Add to Cart) – 온라인 구매가 가능한 경우 “장바구니에 추가”를 클릭한 후 결제 및 배송 정보를 입력하여 주문을 완료하세요. (2) 견적 요청(RFQ, Request for Quotation) – 대량 주문, 특별 가격 조건 또는 리드타임 확인이 필요한 경우 “RFQ”를 클릭하여 Analog Devices Inc./Maxim Integrated MAX4062EUB+에 대한 문의를 제출하세요. 영업팀이 가격, 재고 및 배송 옵션에 대해 신속히 회신해 드립니다.

Analog Devices Inc./Maxim Integrated MAX4062EUB+

비교

부품 번호:: MAX4062EUB+

제조업체:: Analog Devices Inc./Maxim Integrated

카테고리:: 오디오 증폭기

패키지:: 10-TFSOP, 10-MSOP (0.118", 3.00mm Width)

데이터시트:: MAX4062EUB+.pdf

설명:: IC AMP CLASS AB STEREO 10UMAX

수량:: RFQ RFQ 목록에 추가 지금 구매 장바구니에 추가

단가:$0

총 가격:$0

결제:

배송:

재고:433

문의 사항을 보내주세요. 즉시 답변 드리겠습니다..

재고:433

수량

단가

총 가격

RFQ 장바구니에 추가

(기사 가격) 대량 할인 가격 신청

제품 상세

ELECTRONIC COMPONENT • PRODUCT DETAIL

MAX4062EUB+ - Micropower RRIO Precision Op Amp (µMAX/MSOP)

MAX4062EUB+ is a precision, ultra-low-power operational amplifier (originally Maxim Integrated; now under Analog Devices). It is intended for battery-driven and sensor-interface circuits where very low supply current, low offset, and rail-to-rail input/output are important.

Open Spec Snapshot Jump to Q&A

Note: This page is a quick reference for identification. Always confirm limits using the latest manufacturer datasheet.

Device Summary System Highlights Core Capabilities Package Notes Signal Pins Spec Snapshot Ordering Variants Replacement Options QA & Traceability Manufacturer Profile Where It's Used Q&A Important Notice

Device Summary & What It Does

MAX4062EUB+ supports precision analog signal conditioning on low-voltage rails. With rail-to-rail input/output behavior, it helps maximize ADC headroom in single-supply systems and can be used for low-level sensor buffering, gain stages, or active filtering.

The device is optimized for micropower operation (around 1.7µA typical quiescent current), which is suitable for always-on nodes and portable instruments. A shutdown control pin provides additional power reduction when the channel is idle.

Practical note: RRIO + low bias current can reduce measurement error and preserve dynamic range when sensor signals approach ground or VDD.

System Highlights You'll Care About

Low standby drain for long-life batteries

Micropower operation helps extend runtime in portable meters, remote sensors, and IoT endpoints.

Cleaner readings from high-impedance sources

Low input bias current and low offset help reduce error when interfacing with dividers and sensors.

More usable swing on single-supply rails

Rail-to-rail behavior improves headroom and helps maximize ADC code utilization.

Straightforward buffering + shutdown control

Unity-gain stability simplifies buffering; shutdown enables deeper power savings between measurements.

Core Capabilities at a Glance

Supply compatibility

Designed for 2.4V–5.5V operation to match common battery and regulated rails.

Micropower current profile

Typical quiescent current is around ~1.7µA (verify per datasheet conditions).

RRIO signal handling

Supports rail-to-rail input and output for better headroom in low-voltage designs.

Unity-gain stability + SHDN

Stable as a buffer; shutdown pin helps reduce consumption when the stage is not needed.

Package Notes & Board Footprint

MAX4062EUB+ is provided in compact µMAX/MSOP surface-mount packaging, suitable for space-constrained layouts.

Package Outline / Land Pattern (Placeholder)

Replace with an official outline drawing or validated footprint reference.

For exact dimensions and recommended land pattern, use the latest datasheet package drawing.

Pin Map & Signal Pin Roles

The MAX4062EUB+ pin set typically includes the differential input pair, a single output, supply/ground references, and a shutdown control input. Naming depends on the package option and drawing.

IN+ / IN−: Non-inverting and inverting input pins
OUT: Amplifier output
VDD / GND: Supply and ground reference
SHDN: Shutdown control for ultra-low power standby

Pin Diagram (Placeholder)

Replace with a clear, labeled pin diagram for the exact package drawing.

Design reminder: If your circuit is sensitive to input common-mode range or output swing under load, verify limits in the datasheet.

Electrical Spec Snapshot

Device Type	Micropower Operational Amplifier (RRIO)
Supply Voltage	2.4V – 5.5V
Quiescent Current (typ.)	~1.7µA
Stability	Unity-Gain Stable
Shutdown Control	Yes (SHDN pin)
Input / Output	Rail-to-Rail Input & Output
Mounting	Surface Mount
Package	µMAX / MSOP (EUB option)
Temperature Range	-40°C to +85°C (typical)
Base Product	MAX4062

Values can vary by test conditions and revision. Use the datasheet for guaranteed limits and compliance decisions.

Ordering Variants & Packaging Codes

Ordering suffixes often represent packaging format or compliance. Confirm suffix meanings before PO.

MAX4062EUB+T - tape & reel packaging
MAX4062EUB+TG035 - internal packing suffix
MAX4062EUB+TG035E3 - compliance suffix variant
MAX4062EUB+TG035E4 - alternate compliance variant

Buying tip: If you need specific RoHS/REACH status or packing (tube/TR/reel), confirm the exact suffix with the supplier.

Replacement Options & What to Verify

For functional substitutes, match supply range, Iq, offset, input bias current, RRIO behavior, and package footprint. Verify stability and output swing with your load and feedback network.

Candidate	Brand	Why it may fit	Verify before use
Alternative Part #1	Brand	Similar supply + RRIO + low Iq	Offset, input CM range, output swing
Alternative Part #2	Brand	Comparable buffer/ADC drive behavior	Capacitive-load stability, shutdown thresholds

Substitute selection should be confirmed by datasheet comparison and (ideally) bench testing under your real operating conditions.

Quality Assurance & Traceability Notes

Source control

We prioritize traceable sourcing routes and verified supply channels for risk reduction.

Receiving checks

Typical checks include labeling/marking review, packaging integrity, and ESD-safe handling.

Lot & date code records

Where available, supplier/lot/date-code information can be retained to support traceability requests.

Pre-shipment review

Quantity and packing verification may be performed before dispatch. Request photos/reports when needed.

Important: QA workflows vary by route and customer compliance needs. For automotive/medical requirements, communicate expectations early.

Manufacturer Profile (Analog Devices)

The MAX4062 family originated under Maxim Integrated and is now part of Analog Devices (ADI), a global supplier of analog, mixed-signal, and signal-chain technologies.

Focus areas: precision analog, power management, interfaces, signal chains
Common markets: industrial, instrumentation, portable devices, communications
References: datasheets, application notes, reference designs

Where This Part Is Commonly Used

MAX4062EUB+ is typically used in low-power analog front-ends where accuracy and battery life must coexist.

Sensor front-end buffering

Buffering and gain staging for low-level sensor outputs before ADC sampling.

Portable meters and loggers

Battery-powered instruments requiring low standby drain and stable measurements.

ADC input driver (unity-gain)

Unity-gain stable buffering to improve ADC input drive capability and accuracy.

Always-on monitoring nodes

Remote and IoT nodes where ultra-low quiescent current improves uptime.

Questions & Answers (Technical + Purchasing)

Q1: How can I order MAX4062EUB+?

You can place an order via cart (if enabled) or contact sales to confirm bulk quantity and lead time.

Q2: How do you ensure authenticity and quality?

We prioritize traceable sourcing routes and perform receiving checks (label/packaging/handling). For high-risk parts, additional verification may be applied based on criticality.

Q3: Are price and stock always accurate?

Markets change frequently. Website information may update periodically. Please confirm final price and availability before purchase.

Q4: What shipping options are available?

Common logistics include DHL/UPS/FedEx/TNT and other options depending on destination and urgency.

Q5: Can you help with replacements?

Yes. Share your key requirements (supply, Iq, RRIO behavior, footprint, temperature grade) and we can suggest substitutes and what to verify.

Important Technical Notice

Notice: This information is provided for reference and product identification only. Electrical characteristics, package details, and pin functions may differ by revision and ordering suffix. For design, qualification, and compliance decisions, rely on the official manufacturer datasheet.